I can pass along your lock concerns to the manufacturers. Any lock can be defeated given enough time and persistence. A wheel lock such as # RA-25 is a deterrent, as all locks are. If a thief wants that trailer bad enough, they'll find a way.
Thieves have a tendency to pick the low-hanging fruit; that is to say that the mere presence of a lock is likely to cause a would-be thief to move on to an easier target. Things that take time like removing a tire from a trailer are not worth the... view full answer...
We offer two wheel locks that are able to be keyed alike, the Rack'em Lock'em Magnum Wheel Lock # RA-25 and the Club Tire Claw XL Wheel Lock # WI491KA-491LNP. Between the two of these, I personally favor the Rack'em Lock'em Wheel Lock # RA-25. There are replacement keys available for the Lock'em in case you need any extras or lose a key. The Claw XL does not offer replacement keys. The Lock'em is also more economically friendly. view full answer...
For your personal water craft trailer, it is highly likely that your wheel studs are 1/2 inch. The thread coarse isn't much of a concern for the wheel studs, as the thread coarse is usually standard.
To lock the wheels on your pwc, I recommend the Redline Wheel Lock Set for 1/2 Inch Wheel Bolts # RG01-150. These chrome wheel locks will lock both wheels on a single axle.
I have attached a review video of this lock set for you. view full answer...
The highest rated and most popular 2-5/16 inch trailer coupler lock we carry is the Fastway Universal Trailer Coupler Lock, # FA86-0015-316. This lock actually will fit 1-7/8, 2, and 2-5/16 inch couplers. It features a pick-resistant lock cylinder and dual-action, bolt-blocked locking system that locks both arms instead of just one.
To add even more security, you can use the The Wheel Club - Tire and Wheel Lock, # WI490, to one of your trailer wheels. This wheel lock fits tires up to 28... view full answer...
The Rack'Em Lock'em Magnum Wheel Lock # RA-25 will fit wheels that are between 12"-20". This is a heavy-duty lock that deters theft by temporarily disabling 1 wheel. It has rubber coated arms that protect your wheels from scrapes and scratches.
If the wheels on your E-Z-Go Golf cart do not fit in the 12"-20" size frame and you can tell me what size wheels that you have, I would be happy to find a compatible locking system for you. view full answer...
A wheel lock in this case would be something like the Club Tire Claw XL Wheel Lock # WI491KA-491LNP or, even better, Super Grip Chock Wheel Stabilizers # UF21-001091 (which includes padlocks). The Super Grip option will also help prevent front to back rocking of the trailer. I have linked video reviews of both of these products for you. view full answer...
Yes, in general and assuming the same thickness it is easier to cut aluminum when compared to steel. For a steel wheel lock that fits the same size wheels as the aluminum # BLEZ-302 I recommend the Rack'Em Lock'em Magnum Wheel Lock # RA-25. This is a double sided lock that fits 12" - 15" wheels or 15" - 20" wheels. It also features rubber coated arms to keep from scratching your wheels up. view full answer...
We have some great options for both a coupler lock and wheel lock for your Airstream Bambi 16RB. Everything I could find on your trailer says that you have an EZ-latch 2-5/16" coupler and 15" wheels. The coupler lock that I recommend for you is the etrailer Trailer Coupler Lock for Flat Lip 2-5/16" Ball Coupler # e98894 which fits standard, 2-5/16" ball couplers with flat lips.
For wheel locks I recommend the etrailer Trailer Wheel Lock # 288-02020, this wheel lock has 9 adjustable settings... view full answer...
For a wheel lock for your Demco Kar Kaddy SS # DM9713045 I recommend the Blaylock EZ Trailer Wheel Lock - Aluminum - 13" to Small 15" Wheels # BLEZ-300. This is a heavy-duty lock with an aircraft-grade aluminum construction. The adjustable claw clamps around your tire and is secured in place with a recessed lock. It comes with 2 keys and is made in the USA. view full answer...
If you select keyed alike from the drop down menu on the product page of the Blaylock EZ Trailer Wheel Lock # BLEZ-302 you will be able to order as many sets as you need and they will all be keyed alike.
I attached a review video for this wheel lock for you to check out as well. view full answer...
I have another option for you, but we do not offer a Wheel lock set like the Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 that includes 4 locks.
Instead you would need to order two of the # RG01-150 which would give you the 4 locks you need for the 4 wheels on your boat trailer, and since the key is the same between the two sets you will have an extra key.
I included a video of the # RG01-150 for you to take a look at. view full answer...
The lock cables of the Thule and Yakima bike racks would not be long enough to feed through all of the wheels of the bikes to lock them as well but I do have a solution for you.
You could use the Python Cable Lock part # 8419DPF as it is a 6 foot long locking cable that would work well to lock the wheels. You would need to run the cable through the wheels and frame of your bikes so that they would also be locked.
If you want keyed alike locks and cable lock, then the Yakima Same Key... view full answer...
The Pedal to Wheel Vehicle Lock by Club # WICL303RED that you referenced has a maximum distance of 30 inches. If your steering wheel has a tilting feature and you might be able to lower, it further to get it to fit the range of this lock.
Otherwise, you would need to go with a steering wheel lock more like the Twin Hooks Premium Steering Wheel Lock # WI3100. view full answer...
We carry one lug nut style wheel lock. It is # RG01-150. It is for 1/2 inch studs. With it you get 2 locks and 1 key. There isn't an option for multiple wheel locks that use the same key for this product. view full answer...
You really are on the right track with the Wheel Lock Set for 1/2" Wheel Bolts part # RG01-150 this is the best solution I have available for locking each of the wheels and the spare.
You of course will need three sets to take care of your trailer leaving you with one extra to have as a backup that will already match what you have on the trailer.
Check out the video I did on them I have linked for you. view full answer...
The best solution we have is going to actually be a wheel lock since we don't have a lock setup that is recommended for an auto-locking Fulton coupler.
For that I would recommend the # WI491-491LNP. This covers the lug nuts as well as locks the wheel so not only will the wheel be prevented from turning a thief wouldn't be able to remove the wheel either. view full answer...
This Titanium High Security Vehicle Steering Wheel Lock, part # 263DAT, can fit steering wheels up to an inner diameter of 13-1/2 inches. So as long as your Mercedes CLK has a steering wheel that has an inner diameter of less than 13-1/2 inches this would work for you.
The lock on this would be extremely difficult to pick, most likely a car thief would either attempt to cut the # 263DAT or the steering wheel before they attempt to pick the lock. Since this lock has four hooks that secure... view full answer...
The Stallion Trailer Wheel Lock # 288-02020 referenced in your question features a standard steel tubular lock. There is a notch on the lock that makes it more difficult to simply drill out and barrel locks are generally much harder to pick than standard flat key lock cores.
Manufacturers don't usually rate their locks with regards to how hard they are to pick because the honest truth is if a thief really wants something he will likely find a way to get it. The primary purpose of this... view full answer...
What you can do is replace the lock and key with the part # RA25LOCK which will solve your lost key problem. With this you'd replace the lock cylinder and you'd have the correct replacement key for the # RA-25. view full answer...
Go To Results